Filter
Top Products
128
129
16-port Asynchronous/
Synchronous Serial
Network Module
The NM-16A/S combines
the rich multiprotocol
support of the NM-4A/S
and NM-8A/S with higher
densities to provide
compelling price-per-port
solutions for networking
applications In addition to
the features of the
NM-4A/S and NM-8A/S,
the NM-16A/S adds
EIA-530A support, and
support for physical
lead manipulation in the
IOS conguration Lead
manipulation allows the
user to congure the router
to ignore input signals,
view the state of input
signals, and to monitor the
transitions of input signals
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
In order to achieve higher
port density, the
NM-16A/S uses the Smart
Serial connector that is
also used on the WIC-2T
WAN Interface Card Thus
customers must order
Smart Serial cables for
use with the NM-16A/S
instead of the 5-in-1 cables
used on the NM-4A/S and
NM-8A/S
Cisco Network Modules
32-port Asynchronous
Network Module
Provides 32 asynchronous
serial interfaces at speeds
up to 134 Kbps The 32
ports are cabled with four
custom “octopus” cables,
each terminating in eight
ports, each with an option
of physical endpoints,
including RJ-45 and DB-25
connectors
Dial-up Remote Access
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules
16-port Asynchronous
Network Module
Provides 16 asynchronous
serial interfaces at speeds
up to 134 Kbps The 16
ports are cabled with two
custom “octopus” cables,
each terminating in eight
ports, each with an option
of physical endpoints,
including RJ-45 and DB-25
connectors
Dial-up Remote Access
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules
Four-port Asynchronous/
Synchronous Serial
Network Module
Provides four low-speed
serial connections via DB-
60 connectors that support
ve interface types (RS-
232, RS-449, RS-530, V35,
X21) in either DTE or DCE
mode The low-speed
serial connections can be
congured for up to either
1152 Kbps asynchronous
or 128 Kbps synchronous
serial trafc
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4 No reliance on
other network modules,
WICs, voice interface
cards, or advanced
integration modules
Eight-port Asynchronous/
Synchronous Serial
Network Module
Provides eight low-speed
serial connections via
DB-60 connectors that
support ve interface
types (RS-232, RS-449,
RS-530, V35, X21) in
either DTE or DCE mode
The low-speed serial
connections can be
congured for up to either
1152 Kbps asynchronous
or 128 Kbps synchronous
serial trafc
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–
123(8)T4
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules
Cisco Network Modules
Four-port Serial Network
Module
Provides four synchronous
serial interfaces, and
supports a total full-duplex
throughput of 8 Mbps,
which can be realized over
one port (at 8 Mbps) or
across all four ports (at 2
Mbps on each port) Each
port supports full-duplex
operation at T1 and E1
speeds All ports use
identical DB-60 connectors
that support ve interface
types (RS-232, RS-449,
RS-530, V35, X21) in either
DTE or DCE mode
Serial and Legacy
Concentration
3800 Series–123(11)T
2811, 2821, and 2851–not
supported
No reliance on other
network modules, WICs,
voice interface cards,
or advanced integration
modules