Page -6 - CLARKE TECHNOLOGY Operator's Manual - C2K Series 120V
OPERATOR SAFETY INSTRUCTIONS (cont.)
WARNING: Use of this machine as a step or furniture could result in injury or damage. Do not use this
machine as a step or furniture. Do not ride on this machine.
WARNING: To avoid injury keep hands, feet and loose clothing away from all moving parts of this
machine.
WARNING: Injury to operator or bystanders could occur if an abrupt change in floor surface texture is
encountered when using this machine. Abrupt change in floor surface texture can cause a
sudden pulling motion by this machine. This sudden pulling motion can result in loss of
control of the machine which could injure the operator or bystanders. Avoid motions that
could cause machine to cross from a smooth floor surface to a carpeted or rough texture
floor surface Avoid motions that could allow the machine to come in contact with low
obstacles, such as floor electrical outlets, door stops or entry molding, etc.
WARNING: Water solutions or cleaning materials used with this type of machine can leave wet areas
on the floor surface. These areas can cause a dangerous condition for the operator or
other persons. Always put CAUTION signs near the area being cleaned.
WARNING: Any alterations or modifications of this machine could result in damage to the machine or
injury to the operator or other bystanders. Alterations or modifications not authorized by
the manufacturer voids any and all warranties and liabilities.
CAUTION: The machine is heavy. Get assistance before attempting to transport or move it.
NOTE: This machine is intended for commercial use.
MACHINE INTRODUCTION
The CLARKE TECHNOLOGY C2K Series
The C2K Series are floor maintaining machines that can be used for polishing, spraying, buffing, stripping and
shampooing. The machines can be used on wood, vinyl, terrazzo or cement floors. With the shampoo brush, the
machines can be used to clean carpet and with the sanding disc they can be used to sand floors.