Filter
Top Products
EN
ENGLISH
-12-
Clarke
®
American Sanders
Operator's Manual (EN) - EZ-8 Sander
Routine Maintenance
The following items need to be periodically inspected
and maintained to keep your sander in good working
condition.
Sanding Chamber
Periodically blow out the sanding chamber to prevent
large accumulations of debris which could interfere
with the performance of the dust recovery system.
Wheels
Periodically remove the debris from the truck and
caster wheels. Debris can cause waves on a sanded
surface.
Dust Bag
Remove the dust bag from the machine and shake it
thoroughly to remove the sanding dust from the dust
bag. Turn the dust bag inside out and machine wash
in cold water to prevent pore blockage and loss of
dust recovery.
Drive Belt
Periodically check the drive belts for broken cogs or
frayed edges. Frayed edges may indicate poor
tracking. Realign effected belt.
Bearings
Arbor shaft
Relubricate every 150
hrs. w/.10 oz. of a NLGI
grade 2, -30
0
F to 250
0
F,
58-75 SUS at 210
0
F,
grease lubricant.
Motor shaft
after 1
st
5000 hrs.
Fan shaft
After first 1500 hrs.
Periodically check the bearings for wear or damage
according to the following schedule.