Filter
Top Products
ORDERING INFORMATION
Electrical
Dual Voltage Input, 120/277 VAC,
60Hz
Low Voltage Disconnect
Line-latching
Brownout Circuit
Watchguard EMS Self-Diagnostic
System
Fas-Test™ Photocell Test Switch
Fully Recharged in 24hrs
Housing Construction
Die-Cast Aluminum Housing
Powder Coat Finish
Universal/Reverse Mounting
1/2” Threaded Conduit Access
Snap Fit Design
Battery
Sealed Lead Calcium
Long Life, Maintenance Free
Head/Lamp Data
Two 6V 12W MR16 Lamps
Fully Adjustable
Code
Compliance
UL 924 Listed
Damp Location Listed
City of Chicago Approved
Life Safety NFPA 101
NEC/OSHA
Warranty
Unit – 1 Year
Battery – 5 Year Pro-Rata
Key Features
SAMPLE NUMBER: 6CHEL1SD
(1)
The "Rule of Thumb" spacing
guidelines are designed to achieve 1
foot-candle average and 0.1 foot-
candle minimum with a 40:1
maximum/minimum ratio. The
corridor used is 100 feet long with a 9
foot ceiling, 6 foot wide walkway, and
a 3 foot path of egress. The
reflectances are 80% ceiling, 50%
walls and 20% floors. The fixture
mounting height is 7.5 feet with a
lamp head angle of 60 degrees.
Cooper Lighting assumes
no responsibility for local
requirements or specific project
variables. This is a guideline to be
used as a design aid, not as
guarantee of any code compliance.
ELECTRICAL RATINGS
Model DC Voltage 1 1/2 Hours
CHEL1SD 6 24
Rated Wattage to 87 1/2% of Rated D.C. Voltage
Lamp Information
Type Wattage Number Spacing
(1)
MR16 12 29-140 50'
Ordering Information
ADX060175
Customer First Center 1121 Highway 74 South, Peachtree City, GA 30269 770.486.4800 Fax 770.486.4801
NOTES: See option/accessories or technical sections for additional detailed product data. Specifications and Dimensions subject to change without notice.
Family
CHEL1=Architectural
Emergency
Light
CHEL1
SD=Self
Diagnostics
(Standard)
SD
Accessories (order separately)
LASER=Key Chain, Red Laser
Pointer (activation tested at 30
feet)
Housing
Finishes
Blank=Silver
BK=Black
WH=White
Options
TDM=Time Delay
Monitor
6.5”
[165mm]
11.5”
[292mm]
4.0”
[102mm]