Filter
Top Products
assembWy
2. Attach the dust trap . make surethe top edge is
below the surface of the abrasve be t
PAN HEAD SCREW
AND LOCKWASHER E3ELT DUST TRAP
INSTALLING BACKSTOP
1. Find one 5/16" x 1" Hex. Head bolt and one fiat
washer among the loose parts.
2. Place the washer on the bolt. and screw it halfway
into the mounting hole. Place the backstoo into pos-
tion and tighten the bolt. When removing the bacK-
stop, loosen the bolt but do not remove it,
BACKSTOP BACKSTOP
LOCK SCREW
getting to know your belt and
WARNING: FOR YOUR OWN SAFETY TURN
SWITCH "OFF" AND REMOVE PLUG FROM
POWER SOURCE OUTLET BEFORE MAKING
ANY AOJUSTM ENTS.
LOCK SCREW
\
\
\
BACKSTOP
disc sander
BACK OF SANDER
BELT ADJUSTING
SCREW
(ONE ON EACH SIDE)
WORK
TABLE
WORKTABLE
TILT LOCK SCREW
/
/
/
6 BELTTABLE 2 BELT_OC_'_G
STOP SCREW
(ONE ON EACH SIDE)
FRONT OFSANDER
\
IDLER
PULLEY
16