Filter
Top Products
Size of Sanding Disc
Size of Polishing Sonnet
Horsepower
6 inches Rating 120 volts,60 Hz, AC only,4.5 amps.
6 inches Spindle Size 1/2 inch 20 TPI
1/2 No Load Speed 1,400/min. & 1650/min.
WARNING: Always wear safety goggles or
safety glasses with side shields when operating
your sandedpolisher. Failure to do so couldresult
in dust, shavings, loose particles or foreign
objects being thrown into your eyes, causing
possible serious injury.
KNOW YOUR SANDER/POLISHER
Your sandedpolisher is suitablefor sandingwith
coarse, medium, and fine grit sanding discs. When
used withthe polishingbonnetsupplied, it can also be
used as a bufferor polisher.
Before attempting to use any tool,familiarize yourself
with all operatingfeatures and safetyrequirements.
,_ WARNING: The double insulated system is
intended to protect the usar from shock resulting
from a break in the tool's internal wiring. Observe
all normal safety precautions related to avoiding
electrical shock,
TWO SPEED SWITCH
See Figure 1.
Your sander/polisherisequipped with a two speed
switchtdgger locatedin the rear handle,To turn ON,
depress switchtdgger, to turn OFF, release switch
tdgger, For low speed sandingor polishing, depress
switchtdgger haffway.Forhighspeed sandingor
polishingdepress switchtrigger all the way. Be sum
switch trigger is in OFF position before
connecting to power supply source.
WARNING: Do notallow familiaritywithyour
tool to make you careless. Remember that a
carelessfraction of a second is sufficientto inflict
severe injury.
POUSHING
BONNET
SWITCHTRIGGER
SANDINGDISC
(NOTINCLUDED)
AUXlUARYHANDLE
Fig. 1
6