Filter
Top Products
KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sander, familiarize
yourself with all operating features and safety
requirements.
_I, WARNING: If any parts are missing do not
operate your sander until the missing parts are
replaced. Failure to do so could result in possible
serious injury.
Your sander has a comfortable palm grip that
provides easy handling and positive control and is
suitable for sanding with coarse, medium, and fine grit
sanding disc.
SWITCH
This tool is equipped with a simple switch control. To
turn your sander ON, depress the switch button as
shown in Figure 1. Depress the switch button in the
opposite direction to turn your sander OFF.
SWITCHBUTTON
RANDOM ORBIT
The random orbit motion provides overlapping sanding
movements by combining orbital and turning motion.
These overlapping sanding movements provide fast
cutting action with excellent sanding results.
ELECTRICAL CONNECTION
Your sander has a precision built electric motor. It
should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current).
Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and
the motor will overheat. If your tool does not operate
when plugged into an outlet, double-check the power
supply.
_ WARNING: Do not allow familiarity with your
sander to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
ON
OFF
BACKINGPAD
DUSTBAG
ASSEMBLY
SANDINGDISC
Fig. 1