Filter
Top Products
SWITCH
See Figure 4.
To turn your worklight on and off, depress switch
trigger.
MULTI-POSITION HEAD
See Figure 4.
Your worklight has the feature of a multi-position head
that has positive stop clicks at each position. Rotate
head to the desired position as shown in the arrows in
Figure 4,
MULTI-POSITION
HEAD
SWITCH
TRIGGER
Fig. 4
_1= WARNING: When servicing, use only
identical Craftsman replacement parts. Use of
any other part may create a hazard or cause
product damage.
,_ WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
,_ WARNING: Do not attempt to modify this
worklight or create accessories not recommended
for use with this worklight. Any such alteration or
modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
BULB REPLACEMENT
See Figure 5.
When purchasing replacement bulb, request
recommended part number 981258-001.
TO REPLACE BULB:
• Remove battery pack from worklight.
• Remove the two screws securing lens cover, then
remove cover.
• Remove old bulb from spring.
• Position new bulb in spring.
• Replace lens cover and screws.
• Replace battery pack.
Note: For your convenience, a bulb storage area with
extra bulb has been provided. It is located behind the
lens cover. See Figure 5.
BULB
EXTRA
BULB
BULB
STORAGEAREA
LENSCOVER
FORMODELNO.315.268260
REQUESTBULBPARTNO.981258-001
SCREWS
Fig. 5
6