Filter
Top Products
ORBITALMOTION
Orbitalmotionisideal for fast cutting action when
removing old finishes, smoothing rough wood, cutting
stock down to required dimensions, or for finishing
surfaces to be painted. As shown in figure 6. the
sandpaper moves in tiny circles at a very high speed,
a_iowi_ the sander to move easily.
Fig. 6
DUSTLESS SANDING
The dust bag $ocatad on the rear ot your sandeT
provides a dust collection system for your sander.
Sanding dust is drawn up through the holes of the
cushion and collects in the dust bag during sanding
operafion. For more efficient operation, empty dust
bag when half full.
TO EMPTY DUST BAG
• Unplug your sander.
_k WARNING: Failure to unplug your sander could
result in accidental starting causing passible
serious persouat in)uPj.
• Unzip dust bag.
• Shake dust bag to empty.
• _Zi_ dust bag up after emptying.
TO REMOVE DUST BAG FOR EMPTYING OR
CLEANING
See Figure7.
• Unplugyour sander.
_, WARNING: Failure to unplug your sander could
result in accidental starting causing possible
sedous personal injury.
DUSTBAG
TOREMOVE
DUSTBAG Fig. 7
• Slide dust bag retainer from sander as shown by
the arrow in figure 7. Note: Grooves on dust bag
retainer align with grooves on your sander,
• Empty dust bag.
TO INSTALL DUST BAG
See Figure 8.
• Unplug your sander.
_k WARNING: Failure to unplug your sender could
rssuStin accidenta$ stadin 9 ss,usk_j possible
sedous personal injury.
DUSTBAG
DUSTBAG
RETAINERGROOVES
GROOVES
ON SANDER Fig. 8
• Realign grooves on dust bag retainer with
grooves on your sander,
• Slide dust bag assembly into place as shown by
the arrow in figure 8.
9