Filter
Top Products
TWO SPEED BIT STORAGEAREA
GEARTRAIN(HI-LO)
AUXILIARY
HANDLE
KEYLESS
CHUCK
TORQUE SWITCH
ADJUSTMENT TRIGGER
RING
SCREWDRIVERBITS_
DIRECTIONOF
ROTATIONSELECTOR
(FORWARD/REVERSE)
LOCK-ON
BuIrON
Fig. 1
,_ WARNING: If any parts are missing, do not operate
your drill-driver until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
AUXILIARY HANDLE
See Figure 2.
An auxiliary handle is packed with your drill-driver for ease of
operation and to help prevent loss of control. The handle can
be rotated 360°.
Note: For convenience and ease of starting threads, the
hex nut has been trapped inside the molded slot in the
auxiliary handle.
TO INSTALL:
• Unplug your drill-driver.
_1 WARNING: Failure to unplug your drill-driver could
result in accidental starting causing serious injury.
• Place ring of handle over the chuck and torque
adjustment ring. Note: Notches in handle fits in a
groove behind torque adjustment ring.
• Once in position behind torque adjustment ring, rotate
handle to desired angle.
• Thread wing screw into handle insert.
• Tighten wing screw securely.
WINGSCREW TO LOOSEN
AUXlLIAR_ OI_TIGHTEN
HANDLE GROOVE
TORQUE
ADJUSTMENT
RING
NOTCHES
360°
ROTATION
RAISEDRIB
Fig. 2
7