Filter
Top Products
C FOR LIQUID WAX
Apply three swirls of liquid wax on the wax
applicator bonnet. DO NOT APPLY WAX
DIRECTLY TO CAR. This first application
should do about 1/4 of the car. The bonnet
will not absorb as much when reloading.
E
After fiat surfaces are covered with wax,
do sides of the car. Hold the polisher as
shown. Let the cord hang free. It is not
necessary to use a criss-cross motion on
doors and fenders.
D
ALWAYS START AND STOP THE
POLISHER ON OR AGAINST THE
SURFACE.
Place the extension cord over your
shoulder and do flat surfaces first--hood,
trunk and roof. Cover areas quickly with
broad, sweeping strokes in a criss-cross
pattern.
DO NOT press down on the polisher.
The machine's action, not pressure,
does the best job.
1:3
!
LEFt" ! RIOHT
,...L,--
_o4
F
Remove the wax applicator bonnet and
use it to hand-poUsh all hard-to-reach
surfaces; under the bumpers, around the
door handles, etc.
G
Throw away the wax appficator bonnet
and put a clean terrycloth bonnet on the
polisher.
H
Polish the wax in the same order it was
applied. Use long, sweeping strokes in
criss-cross pattern. Do not press hard. l
the polisher do the work.
4