7- ENG
D20059
D20059
CONNECTING THE HOSES
NON-BLEEDER CONNECTOR
The Power Sprayer Wand comes
equipped with an air hose connector
that is designed for use with air
compressors having a pressure relief
valve and a pressure switch.
WATER HOSE
Connect your garden hose to the
Garden Hose Connector. Tighten by
hand.
AIR HOSE
To tighten or loosen
an air hose to this
connector you must use two
wrenches or you could damage the
plastic threads on the base of the
Power Sprayer Wand.
Using a 5/8" open end wrench, hold
the air hose connector. Connect your
air hose and tighten the hose with an
adjustable wrench. Do not
overtighten.
CHEMICAL DRAW HOSE
Never apply air
pressure to the
Chemical Draw Hose Connector.
Doing so could damage the Power
Sprayer Wand.
Attach the chemical draw hose to the
chemical draw hose connector.
Simply slip the hose over the
connector with your hand.
The chemical draw
hose connector is
designed for hand application of
soft, flexible hoses. Do not use any
type of hose clamp or adhesive.
W
A
T
E
R
WATER
AIR
AIR
O
N
ON
O
N
ON
O
F
F
O
FF
SOAP/
CHEMICAL
Water Control
Knob
Garden Hose
Connector
1/4" Air Hose
Connector
Chemical Draw
Hose Connector
Air Control
Knob