Filter
Top Products
5
Extension Cords
CAUTION
!
WARNINGICON G001
Use only three-prong, grounded extension cords marked for outdoor use.
1. Move trigger lock to the OFF position. See PRODUCT IDENTIFICA-
TION on page 4 to locate trigger lock.
2. Unplug tool.
3. Remove nail pusher from nail chamber. Access nail pusher at rear of
nail chamber. Push end of nail pusher in and down to release it (see
Figure 2). Pull nail pusher from nail chamber (See Figure 3).
Loading Tool
Never load tool while it is plugged in. Accidental discharge may
occur. Before loading, move trigger lock to the OFF position and
unplug tool.
WARNING
!
WARNINGICON G 001
Figure 3
Be sure to use the right size extension cord. If cord size is wrong, tool may
be damaged. Tool performance may also be affected. Use only a three-
prong, grounded extension cord.
Extension Cord Size Requirement
1 to 12 feet, use 16 AWG rated cord
12 to 50 feet, use 14 AWG rated cord
Inspect extension cord often. Replace cord if worn or damaged.
Figure 2
Nail Pusher
2
1
Nail Pusher