Delta 36-751 Saw User Manual


 
11
10” Bench Saw
Big saw capacity in an
economical package.
Lightweight for portability; goes where
you go, when you need it.
Ample capacity to cut 3Ó at 90°;
2
1
2Ó at 45°.
Powered by a heavy duty 13 amp.,
115V motor for dependability.
Rip fence locks front and rear to
maintain accuracy at the cut.
Blade tilting and height control knobs are
up-front for convenience.
Self-aligning rip fence aligns and locks itself
parallel to blade with single control lever.
Big 17
1
4Ó x 26Ó table provides ample
support for large ripping operations.
Removable on-off switch to prevent
unauthorized use.
Convenient holder for out-of-the-way
miter gage storage.
See-thru blade guard with integral
splitter and anti-kickback fingers for oper-
ator safety.
Model 36-540 Type 2 10Ó Bench Saw. Includes
basic machine with 13 amp., 115V, 60 Hz. motor;
rip fence, miter gage, see-thru blade guard with
splitter and anti-kickback fingers, 10Ó carbide-
tipped saw blade, standard table insert, blade
wrenches and instruction manual.
Model 36-540
10Ó Bench Saw
Cuts stock 3Ó thick at 90°, offers full 2
1
2Ó
cutting capacity at 45° blade tilt.
Model 36-545 10Ó Bench Saw
with Stand. Same as above, but with
steel stand.
T-slot table groove prevents miter gage
from falling during wide cut-off operations.
For accessories, see page 29
®
SPECIFICATIONS
Motor .......................................13 amp., 115V, single phase, 60 Hz.
Blade:
Diameter ......................................................................10Ó (254 mm)
Arbor .............................................................................
5
8Ó (16 mm)
Speed .................................................................................4700 rpm
Capacity:
Max. depth of cut at 90° .................................................3Ó (76 mm)
Max. depth of cut at 45° ...............................................2
1
2Ó (64 mm)
Max. rip to right of blade.............................................9
7
8Ó (252 mm)
Max. width of cut-off at 1Ó depth of cut
with T-slot miter gage................................................10Ó (254 mm)
Max. width of dado .........................................................
1
2Ó (13 mm)
Table:
Size.......................................................17
1
4Ó x 26Ó (438 x 660 mm)
T-slot ...............................................................
3
16Ó x
5
8Ó (5 x 16 mm)
Overall Dimensions:
Model 36-540 ...........15ÓH x 26ÓW x 24ÓD (381 x 660 x 610 mm)
Model 36-545 ...........39ÓH x 26ÓW x 24ÓD (991 x 660 x 610 mm)
Weight:
Model 36-540........................................................ 40 Ibs. (18 kg)
Model 36-545........................................................ 51 Ibs. (23 kg)