Filter
Top Products
8
Compare all parts to the list below and check that all parts are present and in good condition. Report any missing
or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to
familiarize yourself with proper assembly, maintenance and safety procedures.
PRODUCT SPECIFICATIONS
UNPACKING
DESCRIPTION (QUANTITY)
1. 37-071 6” Jointer (1)
2. Fence
3. Rear Fence Support (1)
4. Rear Fence Bracket (1)
5. Dovetail Clamp (1)
6. Indexing Handle (1)
7. Fence Mounting Plate (1)
8. Fence Angle Lock (1)
9. 45°/90° Angle Stop (1)
10. Hardware Package (1)
11. 4 mm Hex Wrench (1)
12. 6 mm Hex Wrench (1)
13. Push Blocks (2)
14. Dust Chute (1)
15. Operator’s Manual (not shown)
CONTENTS OF
HARDWARE PACK
• M8 x 16mm Hex Head Screws (4)
• M8 x 20mm Hex Head Screws (2)
• 8mm Lock Washers (6)
Weight 76 lbs
Overall Dimensions (L x W x H) 26 x 8 x 10 in.
Table Dimensions (L x W) 28-1/2 in. x 6-¼ in.
Motor
12 amps
120V
Single-Phase
60 Hz
Maximum Width of Cut 6 in.
Maximum Depth of Cut 1/8 in.
Number of Knives 2
Cuts per Minute 20,000
Fence Length 22-7/8 in.
Fence Height 4-5/16 in.
Fence Angle 45°, 90° and 135°
Cutterhead Diameter 1-7/8 in.
Cutterhead Speed 10,000 RPM