Filter
Top Products
17
English
CODE POSSIBLE CAUSE POSSIBLE SOLUTION
16
Loose electrical connections Contact a D
e
WALT factory service center or a D
e
WALT
authorizedservicecenter.
17
Possible defective motor. Contact a D
e
WALT factory service center or a D
e
WALT
authorizedservicecenter.
18
Fuse blown, circuit breaker tripped 1. Check fuse box for blown fuse and replace as necessary.
Reset circuit breaker. Do not use a fuse or circuit
breaker with higher rating than that specified for your
particular branch circuit.
2. Check for proper fuse. Use only a time delay fuse.
3. Check for low voltage conditions and/or proper extension
cord.
4. Disconnect the other electrical appliances from circuit or
operate the compressor on its own branch circuit.
19
Tank pressure exceeds pressure switch cut-in pressure Motor will start automatically when tank pressure drops
below cut-in pressure of pressure switch.