Filter
Top Products
ENGLISH
29
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845
L
pA
(sound pressure) dB(A 91 91 90 90 91 91 90 90 91 90
K
pA
(sound pressure
uncertainty K) dB(A) 3 3 3 3 3 3 3 3 3 3
L
WA
(acoustic power) dB(A) 102 102 101 101 102 102 101 101 102 101
K
WA
(acoustic power
uncertainty K) dB(A) 3 3 3 3 3 3 3 3 3 3
Vibration total values (triax vector sum) determined according to EN60745:
Vibration
emission value m/s² 9.7 9.7 13.7 13.7 9.7 9.7 13.7 13.7 9.7 13.7
Uncertainty K m/s² 2.3 2.3 5.3 5.3 2.3 2.3 5.3 5.3 2.3 5.3
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
The declared vibration emission value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission
value during actual use of the power
tool can differ from the declared value
depending on the ways in which the tool
is used. This could lead to a significant
underestimate of exposure when the
tool is used regularly in such a way.
An estimation of the level of exposure to vibration
experienced during a given period of work should
also take into account the times when the tool is
switched off and when it is running idle in addition to
the trigger time.
This may significantly reduce the exposure level over
the total working period.
EC-Declaration of conformity
DC820, DC822, DC825, DC827, DC830, DC832, DC835,
DC837, DC840, DC845
DEWALT declares that these tools have been
designed in compliance with:
98/37/EC, 89/336/EEC, 2006/95/EC, EN 60745-1,
EN 60745-2-2, EN 55014-2, EN 55014-1.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Director Engineering and Product Development
Horst Grossmann
DEWALT, Richard-Klinger-Strase 11,
D-65510, Idstein, Germany
16/08/2007
4