Filter
Top Products
English
2
A. Trigger
B. Trigger lock-off
C. Depth adjustment wheel
D. Low battery & jam/stall
indicator lights
E. Stall release lever
F. Contact trip
G. Magazine
H. Pusher latch
I. Bump/sequential
selector switch
J. Rotating rafter/belt hook
K. On-board hex wrench
L. Battery Pack
M. Dual speed switch
(DCN692 only)
NAIL SPECIFICATIONS
Clipped Head
Nail Lengths 2"– 3-1/2" (50 mm – 90 mm)
Shank Diameters .113"–.131" (2.8 mm – 3.3 mm)
Nail Stick Angles 30˚– 34˚
Shank Types Smooth and Ring
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
TOOL SPECIFICATIONS
Firing Mode Selective: Bump or Sequential
Voltage 20
Height 13.5" (346 mm)
Width 4" (104 mm)
Length 13.25" (335 mm)
Weight 7.80 lbs. (3.538 kg)
Magazine Angle 33˚
Loading Capacity Up to 55 nails
G
J
K
M
E
A
F
FIG. 1
H
B
C
I
D
L
DCN692