Filter
Top Products
9
English
TROUBLESHOOTING
Problem Possible Cause Possible Solution
• Unit will not start. • Cord not plugged in.
• Circuit fuse is blown.
• Plug tool into a working outlet.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a D
EWALT service
center or authorized servicer.)
• Circuit breaker is tripped. • Reset circuit breaker. (If the product
repeatedly causes thecircuit breaker to
trip,discontinue use immediately and
have it serviced at a D
EWALT service
center or authorized servicer.)
• Cord or switch is damaged. • Have cord or switch replaced at a
DEWALT Center or authorized servicer.