Filter
Top Products
5
English
Mounting and Removing Surface Grinding
Shroud
1. Follow the mounting and removing guard instructions in tool
manual to remove the guard from grinder.
2. Open the clamp lever (G) on the surface grinding shroud and align
the tabs (H) on the surface grinding shroud with the slots (I) on the
grinder gear case.
3. With the clamp lever open, rotate the shroud into the desired
working position. The surface grinding shroud should be
positioned between the spindle and the operator to provide
operator protection.
I
H
FIG. 2
B
G
4. Close the clamp lever to secure the surface grinding shroud on the
gear case. Tighten the clamp adjusting screw (B) to ensure shroud
is secured to gear case.
For optimal positioning, the diamond wheel should ride above the
brushes 1/8" (3.18mm). If diamond wheel rides inside the shroud
or stands taller than 1/4" (6.35 mm) the shroud will not work
properly.
NOTICE: Do not tighten the clamp adjusting screw (B) with the clamp
lever in open position. Undetectable damage to the surface grinding
shroud or the mounting hub may result.
NOTICE: If surface grinding shroud cannot be tightened by the clamp
adjusting screw, do not use the tool and take the tool and surface
grinding shroud to a service center to repair or replace the surface
grinding shroud.
5. To remove the surface grinding shroud, open the clamp lever,
rotate the surface grinding shroud to align the slots and tabs and
pull up on the surface grinding shroud.
Mounting Dry Diamond
Surface Cup Wheels
(Fig. 3)
Follow the mounting and using cutting
K
J
FIG. 3
wheels instructions in the tool manual
and mount the grinding wheel. DO NOT
use Type 1 cutting wheels or bonded
abrasive wheels.
Dry diamond surface cup (J) wheels are
recommended for use with this shroud.
The inner flange washer (K) should be
installed behind the wheel allowing free
tool removal and proper fit.
Dust Extraction
(Fig. 1, 4)
WARNING: Use only power tools recommended by DEWALT with
this attachment.
For more information about D
EWALT power tools compatible with this
attachment, please contact your local dealer, call 1-800-4-D
EWALT
(1-800-433-9258) or visit our website www.dewalt.com.