Filter
Top Products
10
English
FEATURES
ADJUSTABLE POWER DIAL
The dial (J) controls the torque power.
Torque increases with larger circle
settings.
SQUARE DRIVE
The 1/2” square drive (A) allows
attachment of sockets with a
insulation from cold air passing
through the handle.
TRIGGER
The trigger
(B)
allows the operator
to control the start and stop of the
air tool.
FORWARD/REVERSE SWITCH
The forward/reverse switch (C)
is easily accessible with one hand
from the left and/or the right side
of the tool for quick directional
changeover.
TWIN HAMMER MECHANISM
This air tool contains a twin hammer mechanism which provides
more durability and a longer tool life.
COMPOSITE BODY
The body of the air tool is a high-impact composite design (G)
for reduced weight and superior power-to-weight ratio.
The composite body reduces fatigue and provides insulation from
cold air passing through the handle.
HANDLE
This air tool has an ergonomic grip (D)
made of molded thermoplastic elastomer
(TPE) design for improved comfort,
slippage reduction, and better
tool control.
AIR INLET
The tool’s air inlet (E) located at
the bottom of the handle is used for
connecting an air supply with a standard
1/4" NPT American thread.
EXHAUST
The exhaust (I) is located at the base of
the handle and allows the exhaust to be
directed away from the operator and work-
ing area.
SHOCK RESISTANT HOUSING
BUMPERS
The shock resistant housing
bumpers (F) provide protection against housing cracks from
accidental drops of the air tool.
J
A
F
I
E
B
C
D