Filter
Top Products
6
• crystallinesilicafrombricksandcementandothermasonry
products, and
• arsenicandchromiumfromchemically-treatedlumber
(CCA).
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction
activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of
harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust,
which may cause serious and permanent respiratory or other
injury. Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face
and body. Always operate tool in well-ventilated area and provide
for proper dust removal. Use dust collection system wherever
possible.
• Thelabelonyour toolmay includethefollowingsymbols.The
symbols and their definitions are as follows:
V .............volts A ............amperes
Hz ...........hertz W ........... watts
min .........minutes
.........alternating current
.......direct current .........alternating or direct
...........Class I Construction ..............current
...............(grounded)
n
o ..........no load speed
...........Class II Construction ...........earthing terminal
...............(double insulated)
..........safety alert symbol
BPM .......beats per minute …/min ....per minute
RPM .......revolutions per minute IPM ........ impacts per minute
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
Refer to Figure 1 for saw components.
INTENDED USE
These heavy-duty circular saws are designed for professional wood
cutting applications. DO NOT use water feed attachments with this
saw. DO NOT use abrasive wheels or blades. DO NOT use under
wet conditions or in presence of flammable liquids or gases.
These heavy-duty saws are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
M
FIG. 2
WARNING: To reduce the risk of
serious personal injury, Do not use
the saw with the saw hook rotated
below the foot plate.
WARNING: To reduce the risk
of injury from the saw falling on
operators or bystanders, make
sure the saw is supported securely
when using the hook to hang the
saw from a rafter, joist or other
elevated support.