Filter
Top Products
Step 2. Plug in the charger
1.Connect the charger input plug with AC mains.
Step 3. Charging start and LCD indication
1.The LCD battery indicator rolls to indicate batteries are
being charged. The LCD battery indicator remains
constantly on to indicate batteries are fully charged.
2.The LCD battery symbol flashes to indicate charger is in
fault mode.
3.No LCD light indicates the charger is in default mode.
4.The LCD indicating list is as follows:
No.
Status of LCD Status of charger
1
2
3
4
Rolling
On
Flashing
Off
Charging
Full charged
Fault mode
Default mode
Note: The charger will not supply charging current under
default mode.The default mode is due to the below cases:
A. No battery put inside charger
B. Battery connected with reverse-polarity
C. The charger has an internal failure
D. Power off
Step 4. End of Charging
1.When the charge time is completed, the batteries could be
taken out and are ready for use.
2.Remove the charger from the AC mains.
3.Follow the process from step 1 if you want to start another
charge.
Note: Proposed working temperature for charger: 20 C-25 C.
a) Before charging, read usage instructions.
b) This charger is designed for indoor use only. Do not
expose to moisture or rain.
c) Please do not recharge non-rechargeable batteries.
d) This charger is intended to charge AA/AAA
metal-hydride (Ni-MH) batteries only. Attempting to
charge any other types of batteries may cause
personal injury and damage.
e) This charger can charge 2 AA and 2 AAA at the same
time.
f ) Do not mix Alkaline/Ni-MH, or different capacity
batteries together to charge.
g) Remove charger from AC mains when not in use.
h) Never use an extension cord or any attachment not
recommended by manufacturer. Otherwise, this may
result in a risk of fire, electric shock or injury to persons.
i ) Do not operate the charger if it has been subjected to
shock or damage. Take it to a qualified service-man for
repair. Not recommended for use by children.
j ) Do not disassemble the charger. Incorrect reassembly
may result in a risk of electric shock or fire. Unplug the
charger from outlet before attempting any maintenance
or cleaning.
k) This power unit is intended to be correctly positioned in
a vertical or floor mount position.
l) For connection to a supply not in the U.S.A, use an
attachment plug adapter of the proper configuration for
the power outlet.
m) This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
n) Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.