DigiPower TC-370 Battery Charger User Manual


 
B. Australia/New Zealand
1. Locate the black button / latch at the base of the
charger where the North American / Austrailian
Plug is embedded.
2. Release the North American / Austrailian plug by
pressing down on the button / latch. Continue to
push the North American Plug upward until it is
in a 90 degree position (Figure A).
3. Twist the North American / Austrailian Plug on
the left side clockwise direction until it is in a 45
degree angled position. Twist the North
American Plug on the right side in a counter
clockwise direction until it is in a 45 degree
angled position (Figure B).
Figure B
4. You may now place your Lithuim-Ion battery in
the charger. Insert the plug into a wall outlet
and begin charging your battery.
C. United Kingdom
1. Locate the Euro Plug on the same side as the
North American Plug. Grasp the end of the Euro
Plug and pull it up until it is in a 90 degree
angled position.
CAUTION: For safe and proper use make sure
that the North American Plug locks into a closed
position (Figure C).
2. Pull out the UK Key from its position on the
front of the charger.
3. First insert the UK Key into the ground socket of
the wall outlet. This action will open the two top
power sockets. Now insert the Euro Plug into the
power sockets on the wall outlet.
UK Key
Figure C
4. You may now place your Lithuim-Ion battery into
the open slots provided on the side opposite of
the plugs. Insert the plug into a wall outlet and
begin charging your batteries.
NOTE: When you have finished charging your
battery, replace the UK Key to its proper
position on the front of the charger.
D. Europe / Asia
1. Locate the Euro Plug on the same side as the
North American / Austrailian Plug. Grasp the
end of the Euro Plug and pull it up until it is in a
90 degree angled position (Figure D).
CAUTION: For safe and proper use make sure
that the North American Plug locks into a closed
position
Figure D
2. You may now place your Lithuim-Ion battery in
the charger. Insert the plug into a wall outlet
and begin charging your battery.
ONE YEAR WARRANTY:
Mizco International, Inc. warrants this product to
be free from defects in materials and workmanship to the
original purchaser for a period of One Year from the
original purchase date. Mizco’s responsibility with regard
to this limited warranty shall be limited solely to the
repair or replacement, at it’s own option, of any product
which fails during normal use. This warranty does not
extend to damage or failure, which results from misuse,
neglect, accident, alteration, abuse, improper
installation, or improper maintenance. To exercise this
limited warranty, send your name and address with proof
of purchase and the UPC from the package. Product
sent for warranty must be mailed to the address below,
freight prepaid. Include $5.00 for return shipping and
handling.
DigiPower
140 58
th
Street
Building B, Unit 4G
Brooklyn, NY 11220
www.digi-power.com
e-mail: digipowersolutions@mizco.com
MADE IN CHINA