Filter
Top Products
Page 20
Mandrel No. 401 is used with the felt polishing tip and
wheels. Thread the tip on to the screw carefully.
The felt tip must thread down straight on the screw
Mandrel, and be turned all the way to the collar.
Mandrel No. 402 has a small screw at its tip, and is
used with emery cutting wheels and sanding discs.
Higher speeds, usually maximum, are best for most
work, including cutting steel. Which is shown here.
The machine-screw threading on Mandrel No. 424
threads into polishing point No. 427.
This and other threaded mandrels must be screwed
firmly down to the collar before being used.
DM 2610925743 02-05 2/7/05 9:34 AM Page 20