Dynex DX-24E310NA15 Work Light User Manual


 
5
Specifications DX-24E310NA15
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions/VGA scan rates
Tuner
Inputs
Outputs
Audio
Power
Miscellaneous
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic
RF/EMI connector hoods to maintain compliance with FCC Rules and
Regulations.
Without stand
22.1 × 13.7 × 2.4 in. (56.2 × 34.9 × 6.2 cm)
6.2 lbs. (2.8 kg)
With stand
22.1 × 15.6 × 6.3 in. (56.2 × 39.7 × 16 cm)
7.3 lbs. (3.3 kg)
Screen size measured
diagonally
24 in.
Display type LED
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 720p
Panel resolution 1366 (H) × 768 (V)
Aspect ratio 16:9
Contrast ratio
(typical)–panel
1,200:1
Dynamic contrast ratio–
list value
50,000:1
TV brightness (minimum)
cd/m2
144 nits
Comb filter 3d y/c digital
Response time 8 ms
Horizontal viewing angle 176°
Vertical viewing angle 176°
HDMI suggested resolutions 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
2 (side)
E-EDID compliant
HDCP compliant
Component video No
Composite video 1 (side)
Audio Ye s
PC/VGA No
3.5mm PC audio input No
DVI 1 (side)
HDMI1/DVI jack
Supports Video Only
USB
1 (side)
Supports JPEG and firmware upgrade
Antenna/Cable 1 (side)
Video No
Analog audio/Headphone 1 (side)
Digital audio 1 (coaxial) (side)
WiFi No
Ethernet No
Speakers
Number: 2
Watts per channel: 2.8W
Power consumption
On: 36W
Standby: <1W
Power input DC 12V , 3A
OSD languages English, French, Spanish
INlink No
Game Mode No
ENERGY STAR qualified No
Internet connectable No
TV base screws
Base to stand column:
M4 type (12 mm length) (3 pcs)
V-Chip (version 2.0) Yes
Sleep timer Yes
Channel labeling Yes
VESA mount (mm)
(horizontal × vertical)
75× 75
VESA mount screws M4 type
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.