Filter
Top Products
5
• Do not force the drills and only move as quickly
as the drills will allow.
• Stop the engine and disconnect from ignition
cable before: - cleaning or when clearing a
blockage; checking, maintenance or working on
the machine.
• Handle fuel with care; it is highly flammable.
Never add fuel to a machine with a running or
hot engine.
• Do not attempt to repair the machine unless
you are qualified to do so.
• Do not operate the machine with a damaged or
excessively worn drill bit.
• Always ensure all handles and guards are fitted
when using the machine. Never attempt to use
an incomplete machine or one fitted with an
unauthorized modification.
• When starting to drill, run the engine at full
throttle.
WARNING DANGER
BEFORE DRILLING, BE SURE TO READ AND
UNDERSTAND THE ENTIRE OPERATOR’S
MANUAL TO AVOID THE CHANCE OF
SERIOUS INJURY.
• When transporting or storing the machine
always remove the drill bit.
• To reduce fire hazard keep engine and
silencer free of debris, leaves or excessive
grease.
• Handle drill with care, contacting with drills
may cause injury.
OPERATING TECHNIQUES