Filter
Top Products
Design Spot 1200C™
©Elation Professional® 55 Design Spot 1200C™
motor’s IC driver has failed.
Gobo 1 Er
Gobo wheel 1 is not located in the home position after the reset.
This message will appear after a fixture rest if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing), the stepper motor is defective, or a stepper motor’s IC
driver has failed for gobo wheel 1.
Gobo rotation 1 Er
Gobo wheel 1 indexing error.
This message will appear after a fixture rest if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing), the stepper motor is defective, or a stepper motor’s IC
driver has failed for gobo wheel 1’s indexing mechanism.
Gobo 2 Er
Gobo wheel 2 is not located in the home position after the reset.
This message will appear after a fixture rest if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing), the stepper motor is defective, or a stepper motor’s IC
driver has failed for gobo wheel 2.
Gobo rotation 2 Er
Gobo wheel 2 indexing error.
This message will appear after a fixture rest if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing), the stepper motor is defective, or a stepper motor’s IC
driver has failed for gobo wheel 2’s indexing mechanism.
Cyan Color Er
Cyan color flag is not located in the home position after the reset.
This message will appear after a fixture rest if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing), the stepper motor is defective, or a stepper motor’s IC
driver has failed for the cyan motor.
Magenta Color Er
Magenta color flag is not located in the home position after the reset.