Filter
Top Products
Design Beam 300™
©Elation Professional, Los Angeles Ca. 25 www.ElationLighting.com
i.e. with the adjusted Step-Time.
8.1.5 Music control
This function is similar to the “Auto Program” described in the previous section with the
exception that this function will advance the built-in program via sound.
8.2 Information:
8.2.1 Time information
These functions will detail different time functions associated with the fixture.
Current Time
This function displays the running time of the fixture from the last power on. The
display shows “XXXX”, where “XXXX” represents the number of hours the fixture
has been running. This counter is automatically reset after every power-on.
Total Run Time
This function tracks the total running time of the fixture from the very first start-up.
Where “XXXX ”represents the total number of running hours. This time is none
destructive and will remain in the fixtures memory indefinitely.
Total Lamp Time
This function tracks the total number of lamp running hours. Where “XXXX”
represents the number of hours the lamp has been running. This counter should be
reset after every lamp change.
Lamp Off Time
This function displays the running time of the lamp from the last power on. The
display shows “XXXX”, where “XXXX” represents the number of hours the lamp has
been running since it was last struck. This counter is automatically reset after every
power-on.
Clear Lamp Time
This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at