Filter
Top Products
Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 14 www.ElationLighting.com
power cord to the appropriate wall outlet.
Clamp Mounting
The Design Wash LED 60
™
provides a unique mounting bracket assembly that integrates
the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in
one unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through
the center hole of the “omega bracket”. As an added safety measure be sure to attached at
least one properly rated safety cable to the fixture using the safety cable rigging point
integrated in the base assembly
Securing the Design Wash LED 60
™
Regardless of the rigging option you choose for your Design Wash LED 60
™
always be sure
to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above. Be sure to only use the designated
rigging point for the safety cable and never secure a safety cable to a carrying handle.