Filter
Top Products
12
Flash power J(Ws) 100 400
Power supply V 90/260 90/260
F-stop, 1m, 100 ISO, with reector 48° 32,5 64,5
Control range J(Ws) 5-100 25-400
Recycling time (230 V) s 0,2-0,5 0,3-1,1
Flash duration (t 0,5) 1/1 s 1/1700 1/850
(t 0,5) 1/16 s 1/1150 1/450
Modelling output W 150 150
Voltage across sync cable V 5 5
Connected load A/VA (W) 8/2080 8/2080
Radio interference suppressiv CE-IEC 491 EN 60 555 - EN 61 000 - 4 - 2/3/4/5
Dimension length x diam. cm 21x14 21x14
Weight kg 1,55 1,9
• Mains switch
• Controls for: modelling on/off, cell on/off, acoustic signal on/off.
• Flash and modelling power control.
• «X» synchro jack socket 3,5 mm.
• Socket for Plug-In remote control.
• Mains inlet socket and two fuses (Mains and modelling).
• Locking bayonet ring for accessory and reector tting
• Tilthead whit 5/8" - inch stand socket
• Thermal safety
• User replaceable ashtube UV coated (5650°K)
• Halogen modelling lamp 150W, with E27 tting, or optional alternative
*200W/GX6.35 with adaptator code 23101.
• Silent fan cooling
• Auto dumping function. Automatic discharge of ash power
• Central umbrella tube plus external tting
• Acoustic recharging signal
• Mains cable
• Synchro cord of 5m (jack 3.5mm plug)
• Protective cover
• Total compatibility with all Elinchrom accessories
• Very fast recycling time
• Very short ash duration
Tolerances and specications conforming to IEC and CE standards. Technical data subject to change
without notice.
Features
Technical data 100BX 400BX