Emerson 396RVP Stud Sensor User Manual


 
MODEL 396R pH/ORP SECTION 1.0
DESCRIPTION AND SPECIFICATIONS
MODEL 396R
Measured Range:
ORP: -1500 to 1500mV
pH: 0 to 14
Percent Linearity Over pH Range:
Wetted Materials: Polypropylene, EPDM, titanium,
glass, (platinum: ORP only)
Process Connections: 1-1/2 or 1-1/4 in. with ball
valve, 1 in. without ball valve
Cable: Integral 15 ft or 9.5 in. 9 conductor cable
except option 60 (9.5 in. coaxial cable with
BNC) Recommended Interconnect (PN
9200273)
Maximum Process Pressure and Temperature:
Hemi bulb: 150 psig (1136 kPa abs) at 212°F
(100°C )
Flat bulb: 100 psig (790 kPa abs) at 212°F
(100°C )
Maximum Pressure at Retraction or Insertion:
Code 21: 64 psig (542 kPa abs)
Code 25: 35 psig (343 kPa abs)
Minimum Conductivity: 100 µS/cm
Weight/Shipping Weight:
Sensor:
Code 21: 2.0 lb/3.0 lb (.9 kg/1.40 kg)
Code 25: 3.0 lb/4.0 lb (1.40 kg/1.80 kg)
Ball Valve:
PN 23240-00; 5 lb/7 lb (2.25 kg /3.20 kg)
PN 23634-00 8 lb/10 lb (3.65 kg/4.55 kg)
J-Box: 3 lb/4 lb (1.40 kg/1.80 kg)
MODEL 396RVP
Measured Range:
ORP: -1500 to 1500mV
pH: 0 to 14
Available pH glass types: GPLR hemi bulb or flat bulb
Wetted Materials: Polypropylene, EPDM, titanium,
glass, (platinum: ORP only)
Process Connections: none, use 1-inch process con-
nector or ball valve kit (1-1/2 inch or 1-1/4 inch)
Temperature Range: 0 to 100C (32 to 212F)
Pressure Range (hemi bulb): 100-1136 kPa abs
(0-150 psig)
Pressure Range (flat bulb): 100-790 kPa abs
(0-100 psig)
Maximum Pressure at Retraction or Insertion:
Code 21: 64 psig (542 kPa abs)
Code 25: 35 psig (343 kPa abs)
Minimum Conductivity: 75 µS/cm, nominal
Preamplifier options: remote
Weight/Shipping Weight:
Sensor: Code 21: 2.0 lb/ 3.0 lb (.9 kg/1.40 kg)
Code 25: 3.0 lb/4.0 lb (1.40 kg/1.80 kg)
Ball Valve: PN 23240-00; 5 lb/7 lb (2.25 kg /3.20 kg)
Hemi Bulb Flat Bulb
0-2 pH 94% 93%
2-12 pH 99% 98%
12-13 pH 97% 95%
13-14 pH 92%
1.2 PERFORMANCE AND PHYSICAL SPECIFICATIONS
2