Filter
Top Products
7 2008SSD-34 (5/11) 6 2008SSD-34 (5/11)
Single-Compressor Module Installation
2.4 Installation Clearance and Dimensions
Allow sufcient clearance on all sides for service access, especially for gas and electrical connections at
the rear of the Compressor Module. Check applicable national and local electrical codes.
Cooling air ow is back to front—from the gas connection end to the oil cooler end. Do not block or restrict
the cooler fans or oil cooler.
Refer to Figure 4 for the dimensions of the Compressor Module.
Figure 4 Compressor Module Dimensions, in. (mm)