Filter
Top Products
OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR CORDLESS HOUSEHOLD
SCRUBBER
Fig. 1
Using Your Cordless Household
Scrubber
Your cordless scrubber has not yet been
charged. Before first use, the power
wand must be charged for a period of 20
hours.
Warning: This appliance is not
submersible. Do not immerse in water
or any other liquids.
1. Make sure that the “On/Off” button
on the power wand is in the “Off”
position.
2. Insert the charging jack into the
charging port. (Fig. 1)
3. The red charging light will light up while
the unit is charging.
4. Let the power wand charge for 20
hours.
Note: Your scrubber will work
approximately up to one (1) hour on a
single charge
Fig. 3
Attaching the Accessories to the
Power Head
Your cordless scrubber comes with a
large brush, a narrow brush and two
extension wands.
Large Brush
Can be used to clean:
Household: tiles, tubs, shower
doors, walls, fiberglass, hard
plastic surfaces, countertops,
backsplashes, patio furniture,
walls and windows.
Automotive: tires, hubcaps, lined truck
beds, vinyl doors.
Narrow Brush
Can be used to clean:
Household: bathroom fixtures,
drains, narrow spaces such
as between appliances or hard to reach
corners.
Extension Wand
Use one or both of the extension wands
to reach high places.
4. To remove the
accessories, turn
the unit off and
then pull them off
the power head.
5. To remove the power
head from the power
wand, press the
release button
and pull apart. (Fig. 4)
Fig. 5
3. If you want to add the other extension
wand, just attach it to the end of the
first one. Again make sure that the two
extension wands are locked together.
4. Insert the power head onto the
extension wand making sure that it
locks in place.
Assembling Your Cordless
Household Scrubber
Your cordless scrubber can be used
with or without the extension wands.
To use without the extension wand:
1. Make sure that the On/Off button
is in the “Off” position.
2. Insert the power head onto the
power wand making sure that it locks
in place. (Fig. 2)
Fig. 2
To use the accessories with
one or both extension wands:
1. Make sure that the On/Off button is
in the “Off” position.
2. Insert one of the extension wands
onto the power wand. (Fig. 5) Make
sure that the two pieces lock in place.
Fig. 4
Release
Button
3. Attach the desired brush (large or
narrow brush) to the end of the
power head by pushing it on. (Fig. 3)
Please note that the power head has a
D-shaped shaft and the brushes have a
D-shaped hole that must be properly
aligned for attachment. Do not force the
brushes onto the power head as they
may be damaged.
1. Power Wand
2. On/Off Button
3. Charging Port
4. Charging Indicator Light
5. Extension Wand
Release Button
6. Extension Wands (x2)
7. Power Head
8. Narrow Brush
9. Large Brush
10. Wall Mount (screws included)
11. Hanging Hook
12. Charging Adapter
(not shown)
Illustrations may differ from actual product.
NOTE: The Cordless Household Scrubber is shipped with the
battery uncharged. Charging of the unit for 20 hours prior
to first use is required.
Technical Specifications
Voltage: 3.6 V DC
Power: 20 Watts
2 3