Filter
Top Products
13
en
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(Figure 2).
➤ Screw the auxiliary handle tightly onto
the left or right side of the power tool,
depending on the working method.
Mounting the gear housing cover
(Figure 3).
➤ Mount the gear housing cover onto
the gear case and tighten with the
2 screws.
WARNING
Fig. 2
Auxiliary handle
Fig. 3
Gear housing
cover
Screw
Screw
3 41 01 130 21 0.book Seite 13 Freitag, 18. Dezember 2009 7:47 07