Filter
Top Products
4
BEFORE YOU BIND
Select the correct comb diameter
using the document measure.
Select the correct punch
profile for the sheet size.
Select releasable dies as
appropriate.
Select the correct back margin
depth for the number of sheets.
To cancel a punch, pull the pin
forward. Test punch a sheet.
2 4
3
Insert the plastic comb into the
opening mechanism. Pull comb-
opening lever forward to open
the comb.
Press the foot pedal to test
punch scrap sheets to check
edge guide setting.
Load punched sheets directly
onto the open comb.
5 6 7
Empty waste tray regularly -
ideally after each use.
8
Back
Cover
BINDING A DOCUMENT
Press the foot pedal to punch
front and back covers first.
Press the foot pedal to punch
sheets in small batches that
do not overload the machine
or the user.
When all punched sheets are
loaded onto the comb, push
the comb lever backwards to
close the comb and remove the
bound document.
Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
21 4
3
Front
Cover
MAX 30
(20lb /
80gsm)
1
CORRECTING A BOUND DOCUMENT
Additional sheets may be added or removed at any time by opening and then closing the comb as previously described.