Filter
Top Products
5
Technical data
Wattage ........................................720 W
No load speed ................. 3300 - 6800 rpm
Sanding stroke ................... 5 mm (0.2 in.)
Sanding base dia. ...........150 mm (5.9 in.)
Weight ............................ 2.3 kg (5.1 lbs.)
Safety level ........................................
/ II
Symbols
Warning of general danger
Read the Operating Instructions/
Notes!
V Volts
A Amperes
Hz Hertz
W Watt
~ Alternating current
n
0
No load speed
Class II Construction
rpm Revolutions per minute
Ø Diameter
Intended use
The sanders are designed for sanding and
polishing wood, plastic, metal, composite
materials, paint/varnish, fi ller and similar
materials.
Do not use with materials containing asbes-
tos.
The tools must not be used when wet or
damp, or operated in a damp environment,
for electrical safety reasons. Use this sander
only for dry sanding.
The user bears sole responsibility
for any damage or accidents resulting from
incorrect use.
Electrical connec-
tion and operation
The mains voltage must correspond to the
voltage on the rating plate!
See the following fi gure for connection and
dis connection of the power cord.
Always switch the tool off before
connecting or disconnecting the power cord!
To start the tool, push the switch (2.1) for-
wards. Slight pressure on the rear end of the
switch is suffi cient to switch the tool off.
2.1