Filter
Top Products
6
Contents
Symbols
The numbers in the figures in-
dicate in which order you
should follow the steps.
Technical data
Safety instructions
General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a)
Keep work area clean and well lit.
Clut-
tered and dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence
Symbols .................................. 6
Technical data .......................... 6
Safety instructions .................... 6
Functional description................ 9
Intended use............................ 9
Operation ................................ 9
Settings................................... 10
Working with the machine.......... 14
Service and maintenance ........... 14
Accessories .............................. 15
Disposal .................................. 16
Warranty ................................. 16
Vvolts
Wwatts
Aamperes
Hz hertz
~ alternating current
d.c.
direct current
n
0
no load speed
Class II Construction
.../min
min
-1
revolutions or reciprocation per
minute
hhour
min minutes
sseconds
kg kilograms
diameter
tip, hint
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Disconnect from the power supply!
Gear-driven eccen-
tric sander
RO90 DX FEQ
Power 400 W
Speed
Eccentric motion 3000 - 7000 rpm
Rotex rotary motion 220 - 520 rpm
Sanding stroke 3.0 mm (0.12’’)
FastFix sanding pad dia. 90 mm
(3.54’’)
Weight (without mains
cable, with sanding pad)
1.45 kg (3.20 lbs)
Safety class /II
...
3