Festool PN571810 Sander User Manual


 
3
Safety rules
Read and understand all in-
structions. Failure to follow all instructions
listed below may result in electric shock, re
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
General safety rules
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of ammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the out-
let. Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodi ed plugs
and matching outlets will reduce risk of elec-
tric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f) Hold power tool by insulated gripping
surfaces only, when performing an op-
eration where the cutting accessory may
contact hidden wiring or its own cord.
Contact with a „live“ wire will make exposed
metal parts of the power tool „live“ and shock
the operator.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the in uence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the
switch is in the off position before plug-
ging in. Carrying power tools with your nger
Contents
Safety rules ....................................... 3
General safety rules ............................ 3
Speci c Safety Rules ........................... 4
Technical data ................................... 5
Symbols ............................................ 5
Intended use ..................................... 5
Electrical connection and operation .. 5
Extension cord ................................... 6
Electronic control .............................. 6
Tool settings ..................................... 7
Dust extraction .................................. 7
Edge protector ................................... 7
Sanding motion .................................. 7
Choice and installation of sanding pads . 8
Attaching the abrasive ........................ 8
Securing polishing attachments ............ 9
Auxiliary handle ................................. 9
Working with the tool ....................... 9
Metalworking ..................................... 9
Maintenance and care ..................... 10
Pad brake ........................................ 10
Accessories, tools ........................... 10
Warranty ......................................... 11
Table A: Sanding ............................. 12
Table B: Polishing ........................... 12