Filter
Top Products
No status light No power Make sure power flow to the wall outlet
to charger is “ON”.
Loose connections Check connections of all plugs. Make
sure the battery connectors are tightly
plugged into the charger connectors
and the power cord connector is tightly
plugged into both the charger and the
wall outlet.
Bad charger There is no sure way to tell if your
charger is working unless you have a
volt meter. If you suspect there is a
problem with your charger, contact
Power Wheels
®
Consumer Relations.
Wrong batteries This charger is intended for use only
with a Power Wheels
®
12-volt system
with two 6-volt lead acid batteries.
Flashing red Loose connections Check connections of all plugs. Make
status light sure the battery connectors are tightly
plugged into the charger connectors
and the power cord connector is tightly
plugged into both the charger and the
wall outlet.
Undercharged Batteries need a 100% (solid green)
batteries charge every other use.
Batteries dead Replace the batteries with a new,
Power Wheels
®
12-volt system with
two 6-volt lead acid batteries.
Solid red Undercharged Charge batteries 100% (solid green) or
status light batteries Ready for Use (flashing green).
Problem Possible Cause Solution
PROBLEMS AND SOLUTIONS
7