Filter
Top Products
223
ROUTER BITS & SETS Router Bit Sets
Nine Piece Basic Bit Set
• Includes a variety of bits that allow you to experience several router
functions.
• Set comes in Freud’s unique shadow box case that can hang on the wall
or mount on the bench to keep bits handy and safe.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Ideal starter set for the beginning woodworker
Five Piece Up Spiral Bit Set
• Use the Up Spiral Bit Set for mortises, dado cuts, and deep blind holes
where chips must be pulled out of the cut, and where speed of cut
is the primary consideration.
• Set comes in Freud’s unique shadow box case that can hang on the wall
or mount on the bench to keep bits handy and safe.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-
mounted portable routers.
Application: Quickly create grooves, mortises, and dadoes
with chip removal
Bit Type Item Overall Carbide Shank Overall
Number Dia. Height Dia. Length
Item Number 90-150
Up Spiral Bit* 75-101 3/16" 3/4" 1/4" 2"
Up Spiral Bit* 75-102 1/4" 1" 1/4" 2-1/2"
Up Spiral Bit* 75-104 5/16" 1" 1/2" 3"
Up Spiral Bit* 75-106 3/8" 1-1/4" 1/2" 3"
Up Spiral Bit* 75-108 1/2" 1-1/4" 1/2" 3"
Red Item Numbers Indicate 1/2" Shank See individual bit for scale profile
# 91-108
# 90-150
# 16-100, # 16-110
# 42-104, # 42-109
# 04-104, # 04-124,
# 12-116, # 12-108
# 22-104, # 22-112
# 34-110, # 34-120
# 32-100, # 32-102
# 70-100
# 38-100, # 38-106
New
Shadow
Box
Bit Type Item Overall Bearing Carbide Number Angle Large Shank Overall
Number Dia. Dia. Height of Flutes Radius Dia. Length
Item Number 88-100 (9 pc. 1/4" Shank Set)
Double Flute Straight Bit* 04-104 1/4" – 1/2" – – – 1/4" 2"
Double Flute Straight Bit 04-124 3/8" – 1" – – – 1/4" 2-1⁄2"
Mortising Bit 16-100 1/2" – 1/2" – – – 1/4" 2"
Dovetail Bit 22-104 1/2" – 1/2" – 14° – 1/4" 1-7⁄8"
Rabbeting Bit 32-100 1-1⁄4" 1/2" 1/2" – – – 1/4" 2"
Rounding Over Bit 34-110 1" 1/2" 1/2" – – 1/4" 1/4" 2-3⁄16"
Roman Ogee Bit 38-100 1-1⁄16" 3/8" 1/2" – – 5⁄32" 1/4" 2-3⁄16"
Bearing Flush Trim Bit 42-102 3/8" 3/8" 1/2" 2 – – 1/4" 2-5⁄16"
Panel Pilot Bit* 70-100 1/4" – 1/4" 1 – – 1/4" 1-5⁄8"
Item Number 91-108 (9 pc. 1/2" Shank Set)
Double Flute Straight Bit 12-116 1/2" – 1" – – – 1/2" 2-5/8"
Double Flute Straight Bit 12-108 3/8" – 1" – – – 1/2" 2-5/8"
Mortising Bit 16-110 1/2" – 1/2" – – – 1/2" 2-3/8"
Dovetail Bit 22-112 1/2" – 1/2" – 14° – 1/2" 2-1/4"
Rabbeting Bit 32-102 1-1⁄4" 1/2" 1/2" – – – 1/2" 2-1/4"
Rounding Over Bit 34-120 1" 1/2" 1/2" – – 1/4" 1/2" 2-1⁄2"
Roman Ogee Bit 38-106 1-3⁄8" 3/8" 1/2" – – 5⁄32" 1/2" 2-3⁄8"
Bearing Flush Trim Bit 42-109 1/2" 1/2" 1/2" 2 – – 1/2" 2-7/8"
“V” Grooving Bit 20-108 3/4" – 1/2" – 90° – 1/2" 2-1/4"
# 20-108
Video-CD
Included
R
o
u
t
i
n
g
T
i
p
s
&
T
e
c
h
n
i
q
u
e
s
* Solid Carbide
NEW
New
Shadow
Box
NEW
# 75-101, # 75-102
# 75-104, # 75-106
# 75-108
* Solid Carbide
222-239 pages 8-31-06 8/31/06 12:58 PM Page 223