Filter
Top Products
PB-31101-035A
Supersedes PB-31101-035
DRILLING MOTOR
MODEL 5GE752RB3A
SEPTEMBER 10, 19979
QUANT
REQ.
FIG. REF. COL.
NO. NO. PART NO. A DESCRIPTION
1 85 41C636928G1 1 SHAFT WITH PLUG
1 86 84A204808P1 2 *SET SCREW, HEX SOC HD, 3/8 IN-24, SELF-LOCK
1 87 41B537605P4 1 ARMATURE HEAD
1 88 41A239323G1 1 PUNCHING, END
1 89 41A330418G1 1 PUNCHING, END
1 90 41B537164P1 553 PUNCHING, MAIN
1 91 41B537165P1 26 PUNCHING, STEP BACK
1 92 41B537165P2 14 PUNCHING, STEP BACK
1 93 41B537889G2 1 COMMUTATOR, SEASONED
1 94 189V584P1 1 NUT
1 95 41D735370G5 1 ARMATURE REWIND KIT
1 96 41B537080P1 1 =TEFLON BAND (CONTINUOUS)
1 97 41A330208P10 AR WIRE, 0.072 IN DIA
1 98 41A239176P64 AR GLASS TAPE, 0.014 IN THICK, 3/4 IN WIDE
1 99 41A239176P62 AR GLASS TAPE, 0.014 IN THICK, 3/8 IN WIDE
1 100 41A232821P1 1 SLEEVE
1 101 2766829ADP24 AR #BALANCE WEIGHT, 13 IN OD
1 102 2766829ADP26 AR #BALANCE WEIGHT, 14 3/4 IN OD
1 103 493A204G1 1 INSPECTION COVER, TOP
1 104 493A204P3 2 GASKET, NEOPRENE, 0.250 X 0.750X93/4INLONG
1 105 493A204P4 2 GASKET, NEOPRENE, 0.250 X 0.750 X 11 IN LONG
1 106 497A806P57 AR *CEMENT
1 107 41D732878G4 1 *INSPECTION COVER, LOWER
1 108 41D732878P7 2 *GASKET, 9/16 IN X 11 9/32 IN LONG, 1/4 IN THK
1 109 41D732878P8 2 *GASKET, 9/16 INX91/2INLONG, 1/4 IN THK
1 110 497A806P57 AR *CEMENT
1 111 41A239914G1 1 INSPECTION COVER, HAND HOLE
1 112 41A239914P2 2 GASKET, 9 1/4 IN LONG, 1/4 IN THICK
1 113 41A239914P3 2 GASKET, 8 1/8 IN LONG, 1/4 IN THICK
1 114 497A806P57 AR *CEMENT
1 115 N22P29016B13 12 BOLT, HEX HD, 1/2 IN-13, 1 IN LONG
1 116 N405P45B13 12 LOCKWASHER, 1/2 IN
N5700P63 4 PIPE PLUG, 3/4 IN, CSK SQ HD
1 118 41A239663P2 4 PLUG
493A471P1 1 *HUB, 9.120 IN OD, POWER TAKE-OFF
* ADDED OR CHANGED SINCE LAST ISSUE.
# WELD OR BRAZE IN POSITION.
= ADDITIONAL MATERIAL IS REQUIRED TO INSTALL THE CONTINUOUS LOOP TEFLON BAND. SEE APPLICATION
INSTRUCTIONS, GEK-76278.
- END OF PARTS BULLETIN -