GE DLSR483 Drill User Manual


 
8
Wrinkle Care Option
(on some models)
Use this option to minimize the wrinkles
in clothes. It provides approximately
15 minutes of no-heat tumbling after
the clothes are dry.
This option can only be used with the
COTTONS and EASY CARE cycles.
If you are using the CYCLE SIGNAL knob
and you select the WRINKLE CARE option,
a signal will sound at the end of the drying
time and several times during the WRINKLE
CARE cycle. This will remind you that it is
time to remove the clothes.
If WRINKLE CARE is not on, the dryer will
stop once the timer reaches the WRINKLE
CARE mark on the cycle dial.
Cycle Signal Option (on some models)
This signal will sound just before the end
of the cycle to remind you to remove the
clothes. On some models the signal sound
level cannot be adjusted.
If you selected the WRINKLE CARE option,
the signal will sound at the end of the
drying time and will sound several times
during the WRINKLE CARE cycle. This will
remind you that it is time to remove the
clothes.
NOTE:
Remove garments promptly at the sound
of the signal. Place clothes on hangers so
wrinkles won’t set in.
Use the Cycle Signal especially when
drying fabrics like polyester knits and
permanent press. These fabrics should
be removed so wrinkles won’t set in.
Automatic Cycle Signal (on some models)
At the end of each cycle, there is
approximately 15 minutes of no-heat
tumbling after the laundry is dry.
A reminder signal will sound periodically
during this time to remind you to remove
the laundry.
About the dryer features.
Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips