English
Variable Speed Jig Saw
Operator’s Manual GJS450
Position Cutting Action Applications
VACUUM ADAPTOR
To connect the vacuum adaptor to the tool,
APPLICATION
BLADE SELECTION
NOTE:This tool is designed to work with T-shank blades. Other types of saw
blades are not guaranteed to work properly and may come loose from the tool.
GENERAL CUTTING
CAUTION: Always hold the base flush with the workpiece. Failure to do so
may cause blade breakage, resulting in a serious injury.
Jig saws cut on the upstroke
To start the cut,
EDGE GUIDE CUTTING
To install the rip guide
BEVEL CUTTING
To adjust the bevel cutting angles