Genesis I.C.E. GCD18BK Cordless Drill User Manual


  Open as PDF
of 13
 
5
English
•Feedtheworkpieceinthecorrectdirectionandspeed.Feedthework
pieceintoablade,cutter,orabrasivesurfaceagainstthedirectionofthecuttingtool’sdirection
ofrotationonly.Incorrectlyfeedingtheworkpieceinthesamedirectionmaycausethework
piecetobethrownoutathighspeed.
•Neverleavethetoolrunningunattended,turnthepoweroff.Donot
leavethetooluntilitcomestoacompletestop.
•Neverstartthepowertoolwhenanyrotatingcomponentisin
contact with the work piece.
BATTERY TOOL USE AND CARE
•
Ensure the switch trigger is in the off position before inserting
battery pack.Insertingthebatterypackintopowertoolsthathavetheswitchoninvites
accidents.
•
Recharge only with the charger specified by the manufacturer.A
chargerthatissuitableforonetypeofbatterypackmaycreateariskofrewhenusedwith
anotherbatterypack.
• Use battery tools only with specified battery pack.Useofanyotherbattery
packsmaycreateariskofinjuryandre.
• Avoid storing battery pack in a container with other metal objects
suchasnails,coins,clips,keys,screws,orothersmallmetalobjectsthatcanmakea
connectionfromoneterminaltoanother.Alwaysprotectthebatteryterminalswhenbattery
packisnotbeingused.Connectingthebatteryterminalstogethermaycauseburnsorare.
• Under abusive conditions, liquid may be ejected from the battery.
Avoidcontact.Ifcontactaccidentallyoccurs,ushwithwater.Ifliquidcontactseyes,additionally
seekmedicalhelp.Liquidejectedfromthebatterymaycauseirritationorburns.
• Battery tools do not need to be plugged into an electrical outlet,
therefore,theyarealwaysinoperationcondition.Beawareofpossiblehazardswhennotusing
yourbatterytoolorwhenchangingaccessories.Followingthisrulewillreducetheriskof
electricshock,reorpersonalinjury.
WARNING:
USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR OTHER
AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST
AND ASBESTOS. Direct particles away from face and body. Always operate
tool in a well-ventilated area and provide for proper dust removal. Use dust
collection system wherever possible. Exposure to the dust may cause serious
and permanent respiratory or other injury, including silicosis (a serious lung
disease), cancer, and death. Avoid breathing the dust, and avoid prolonged
contact with the dust. Allowing dust to get into your mouth or eyes, or lay on
your skin may promote absorption of harmful material. Always use properly
fitting NIOSH/OSHA approved respiratory protection appropriate for dust
exposure, and wash exposed areas with soap and water.
SERVICE
•
Have your power tool Serviced by a qualified repair person using
only identical replacement parts. Thiswillensurethatthesafetyofthepowertool
ismaintained.
 previous next