Filter
Top Products
Dear Customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information:
Please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate, and,
with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance and
dependability have been given top priority to the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All batteries,
tools, hoses and packaging must be sorted,
taken to the local recycling centre and
recycled or disposed of in an environmentally
safe way.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Nominal voltage: 230 – 240Vac ~ 50Hz
Model/Wheel HP Spindle speed Grit
BG125A/1 1/5 HP 2800RPM 36
BG125A/2 1/5 HP 2800RPM 60
BG150A/1 2/5 HP 2800RPM 36
BG150A/2 2/5 HP 2800RPM 60
BG200A/1 2/3 HP 2800RPM 36
BG200A/2 2/3 HP 2800RPM 60
NTS2000A/1 1/2 HP 2800RPM 36
NTS2000A/2 1/2 HP 130RPM 100
Model/Wheel Diameter Width Bore
BG125A/1 125mm 16mm 12.7mm
BG125A/2 125mm 16mm 12.7mm
BG150A/1 150mm 20mm 16mm
BG150A/2 150mm 20mm 16mm
BG200A/1 200mm 20mm 16mm
BG200A/2 200mm 20mm 16mm
NTS2000A/1 150mm 20mm 16mm
NTS2000A/2 200mm 40mm 20mm
3