Filter
Top Products
3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
Voltage: 230–240V ~ 50 Hz
Input power: 1200W
No load speed: 5000 min
-1
Blade diameter: 184mm
Blade teeth: 24 TCT
Blade arbour: 16mm
Blade kerf: 2.5mm
Bevel capacity: 0° to 45°
Depth of cut at 90°: 65mm
Depth of cut at 45°: 43mm
Weight: 4.9kg
Sound pressure level: 96 dB(A)
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or
0800 445 721 in New Zealand.
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way
.
WARNING
It may be more difficult to see the laser line in conditions
of bright sunshine and on certain surfaces.