Filter
Top Products
Setup
332919C 11
Setup
1.
All sprayers except ProContractor:
Connect
appropriate Graco high-pressure hose to sprayer.
2.
Select Units:
Install whip hose to fluid inlet of spray
gun and tighten securely.
3. Engage gun trigger lock.
4. When spraying texture, remove inlet strainer and fil-
ter bowl screen when spraying materials.
5. Fill throat packing nut with TSL to prevent prema-
ture packing wear. Do this each time you spray.
6. Check engine oil level. Add SAE 10W-30 (summer)
or 5W-20 (winter), if necessary.
7. Fill fuel tank.
8. Attach sprayer grounding clamp to earth ground.
ti22698a
ti22700a
ti22701a
ti22743a
ti5952a
ti5953a
ti5787a