Filter
Top Products
Pressure Relief Procedure
334659A 11
6. Put drain tube in pail. Turn prime valve
down. Leave prime valve in down (drain)
position until you are ready to spray
again.
7. If you suspect the spray tip or hose is
clogged or that pressure has not been
fully relieved:
a. VERY SLOWLY loosen tip guard
retaining nut or hose end coupling to
relieve pressure gradually.
b. Loosen nut or coupling completely.
c. Clear hose or tip obstruction.
Trigger Lock
Always engage the trigger lock when sprayer
is stopped to prevent the gun from being
triggered accidentally by hand or if dropped
or bumped.
ti24607a
ti25198a