Filter
Top Products
Setup
332758A 13
Setup
1. Connect Graco airless hose to sprayer. Tighten
securely.
2. Connect other end of hose to gun.
3. Tighten securely.
4. Remove tip guard.
5. Check inlet strainer for clogs and debris.
6. Fill throat packing nut with TSL to prevent
premature packing wear. Do this each time you
spray.
7. Turn power OFF.
8. Plug power supply cord into a properly grounded
electrical outlet.
9. Turn prime valve down.
10. Place siphon tube set in grounded metal pail par-
tially filled with flushing fluid. See Grounding, page
11. Do steps 1- 6 of Startup, page 14, to flush out
storage oil shipped in sprayer. Use water to flush
water-based paint or mineral spirits to flush
oil-based paint and storage oil.
ti22219a
ti22217a
ti22218a
ti2769a
ti5301a
ti5735b
ti5316a
/.
/&&
ti2810a
ti22220a
ti5856a
Flush